Loading PDF...
Pages: 37
AM26C32 Quadruple Differential Line Receiver 1 Features •Meets or exceeds the requirements of ANSI TIA/EIA-422-B, TIA/EIA-423-B, and ITU recommendation V.10 and V.11 •Low power, I CC = 10 mA typical •±7-V Common-mode range with ±200-mV sensitivity •Input hysteresis: 60 mV typical •t pd = 17 ns typical •Operates from a single 5-V supply •3-State outputs •Input fail-safe circuitry •Improved replacements for AM26LS32 device •Available in Q-temp automotive 2 Applications •High-reliability automotive applications •Factory automation •ATM and cash counters •Smart grid •AC and servo motor drives 3 Description The AM26C32 device is a quadruple differential line receiver for balanced or unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active- high or active-low input. The 3-state outputs permit connection directly to a bus-organized system. Fail- safe design specifies that if the inputs are open, the outputs always are high. The AM26C32 devices are manufactured using a BiCMOS process, which is a combination of bipolar and CMOS transistors. This process provides the high voltage and current of bipolar with the low power of CMOS to reduce the power consumption to about one-fifth that of the standard AM26LS32, while maintaining AC and DC performance. Package Information PART NUMBERPACKAGE (1) PACKAGE SIZE (2) AM26C32 PDIP (N, 16)19.3 mm × 9.4 mm SO (NS, 16)10.2 mm × 7.8 mm SOIC (D, 16)9.9 mm × 6 mm SSOP (DB, 16)6.2mm × 7.8mm TSSOP (PW, 16)5 mm × 6.4 mm CDIP (J, 16)mm × 6.92 mm CFP (W, 16)10.3 mm × 6.73 mm LCCC (FK, 20)8.90 mm × 8.90 mm (1)For more Information, see Section 11. (2)The package size (length × width) is a nominal value and includes pins, where applicable. 4Y 3Y 2Y 1Y 4B 4A 3B 3A 2B 2A 1B 1A G G 4 12 2 1 6 7 10 9 14 15 3 5 11 13 Simplified Schematic AM26C32, AM26C32C, AM26C32M, AM26C32I SLLS104M – DECEMBER 1990 – REVISED OCTOBER 2023 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.