Loading PDF...
Pages: 2
Doc. No. MultiPlus Series Rev.A 23-11-15 MultiPlus Series INVERTER CHARGER FEATURES • 800W - 5000W Inverter Charger • Two AC outputs • Parallel Operation • 3Ph capability • Power Assist Boost • Four stage charger • Dual bank charging SPECIFICATIONS INVERTER Input voltage range9.5-17Vdc, 19-33Vdc, 38-66Vdc Output voltage230Vac +/-2% Frequency50Hz +/-0.1% Output PowerSee selection table EfficiencyTypically 94% max CHARGER Input voltage187 - 265Vac Frequency45 - 65Hz Power factor1 Charge voltage 'absorption'14.4 / 28.8 / 57.6 VDC Charge voltage 'float'13.8 / 27.6 / 55.2 VDC Charge voltage 'float'13.2 / 26.4 / 52.8 VDC Charge current house batterySee selection table Charge current starter battery4A (12V & 24V models) Battery temperature sensorYes STANDARDS & APPROVALS SafetyEN60335-1, EN60335-2-29. Emission EN55014-1, EN61000-3-2 ImmunityEN55014-2, EN61000-3-3 Automotive Directive2004/104/EC C-tickAS/NZS CISPR11: Group 1, Class A. MECHANICAL 230VAC connection 800VA to 1600VA: G-ST181 connector 2000VA: Spring clamp 3000VA to 5000VA: Screw terminals 13mm2 (6AWG) Battery connection 800VA to 1600VA, battery cables of 1.5meters 2000VA to 5000VA M8 bolts Protection categoryIP21. Material & colour Aluminum epoxy powder coated cases (blue RAL 5012) Size & Weight 800VA/1200VA/600VA: 375x214x110mm, 10Kg 2000VA: 520x255x125mm, 12Kg 3000VA, 362x258x218mm, 18kg 5000VA, 444x328x240mm, 30kg GENERAL Protection Output short circuit Overload Battery voltage too high Battery voltage too low Temperature too high Input voltage ripple too high PowerControlYes, all MultiPlus inverter/charger models PowerAssistYes, all MultiPlus inverter/charger models Parallel & 3ph operationYes, all MultiPlus inverter/charger models Programmable relay Can be set for general alarm, DC undervoltage or genset start/stop function AC rating 230V/4A DC rating 4A up to 35Vdc, 1A up to 60Vdc VE Bus Communications For parallel and three phase operation, remote monitoring and system integration Remote on-offYes Auxillary output 3000VA: yes (16A) 5000VA: yes (25A) Digital Multi Control A convenient and low cost solution for remote monitoring, with a rotary knob to set Power Control and Power Assist levels Blue Power Panel Connects to a Multi or Quattro and all VE.Net devices in particular the VE.Net Battery Controller. Graphic display of current and voltages BMV Battery Monitor The BMV Battery Monitor features an advanced microprocessor control system combined with high resolution measuring systems for battery voltage and charge/discharge current. The Software includes complex calculation algorithms, to exactly determine the state of charge of the battery. The BMV selectively displays the battery voltage, current consumed AH or time to go. The monitor all stores a host of data regarding performance and use of the battery Computer control & monitoring Several interfaces are available MK2.2 VE.Bus to RS232 converter MK2-USB VE.Bus to USB converter VE Net to VE Bus converter Victron global remote Victron Ethernet Remote