NTE926.PDF datasheet pdf

NTE926 Integrated Circuit Quad Timer Description: The NTE926 quad timer is a monolithic timing device which can be used to produce four independent timing functions. The NTE926 output sinks current. This highly stable, general purpose controller can be used in a monostable mode to produce accurate time delays–from microseconds to hours. In the time delay mode of operation, the time is precisely controlled by one external resistor and one capacitor. A stable operation can be achieved by using two of the four timer sections. The four timer section in the NTE926 are edge–triggered, therefore, when connected in tandem for sequential timing applications, no coupling capacitors are required. Output current capability of 100mA is provided in both devices. Features: D100mA Output Current per Section DEdge–triggered (No Coupling Capacitor) DOutput Independent of Trigger Conditions DWide Supply Voltage Range 4.5V to 18V DTimer Intervals from Microseconds to Hours DTime Period Equals RC Applications: DSequential Timing DTime Delay Generation DPrecision Timing DQuad One–Shot Absolute Maximum Ratings: Supply Voltage, V CC +16V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum Power Dissipation (T A = +25°C), P D 1450mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Derate Above 25°C11.6mW/°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating Ambient Temperature Range, T A 0 to +70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Storage Temperature Range, T stg –65 to +150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lead Soldering Temperature (10 Sec Max), T SOLD +300°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .