USB5806-2 datasheet pdf

 2016-2018 Microchip Technology Inc.DS00002236D-page 1 USB5806 Highlights • USB Hub Feature Controller IC Hub with 6 USB 3.1 Gen 1 / USB 2.0 downstream ports • USB-IF Battery Charger revision 1.2 support on up & downstream ports (DCP, CDP, SDP) •FlexConnect: Downstream port able to swap with upstream port, allowing master capable devices to control other devices on the hub • Internal Hub Feature Controller device enables: - USB to I 2 C/SPI/GPIO bridge endpoint support - USB to internal hub register write and read • USB Link Power Management (LPM) support • Enhanced OEM configuration options available through either OTP or SPI ROM • Available in 100-pin (12mm x 12mm) VQFN RoHS compliant package • Commercial and industrial grade temperature support Target Applications • Standalone USB Hubs • Laptop Docks • PC Motherboards • PC Monitor Docks • Multi-function USB 3.1 Gen 1 Peripherals Key Benefits • USB 3.1 Gen 1 compliant 5 Gbps, 480 Mbps, 12 Mbps, and 1.5Mbps operation - 5V tolerant USB 2.0 pins - 1.32V tolerant USB 3.1 Gen 1 pins - Integrated termination and pull-up/down resistors • Supports battery charging of most popular battery powered devices on all ports - USB-IF Battery Charging rev. 1.2 support (DCP, CDP, SDP) - Apple ® portable product charger emulation - Chinese YD/T 1591-2006 charger emulation - Chinese YD/T 1591-2009 charger emulation - European Union universal mobile charger support - Support for Microchip UCS100x family of battery charging controllers - Supports additional portable devices • Smart port controller operation - Firmware handling of companion port power controllers • On-chip microcontroller - manages I/Os, VBUS, and other signals • 8 KB RAM, 64 KB ROM • 8 KB One-Time-Programmable (OTP) ROM - Includes on-chip charge pump • Configuration programming via OTP ROM, SPI ROM, or SMBus • FlexConnect - Reversible upstream and downstream Port 1 roles on command •PortSwap - Configurable USB 2.0 differential pair signal swap •PHYBoost TM - Programmable USB transceiver drive strength for recovering signal integrity •VariSense TM - Programmable USB receive sensitivity •Port Split - USB2.0 and USB3.1 Gen1 port operation can be split for custom applications using embedded USB3.x devices in parallel with USB2.0 devices. • USB Power Delivery Billboard Device Support - Internal port can enumerate as a Power Delivery Billboard device to communicate Power Delivery Alternate Mode negotiation failure cases to USB host • Compatible with Microsoft Windows 10, 8, 7, XP, Apple OS X 10.4+, and Linux hub drivers • Optimized for low-power operation and low ther- mal dissipation • Package - 100-pin VQFN (12mm x 12mm) 6-Port USB 3.1 Gen 1 Smart Hub

Features

• • USB Hub Feature Controller IC Hub with 6 USB
• 3.1 Gen 1 / USB 2.0 downstream ports
• • USB-IF Battery Charger revision 1.2 support on
• •FlexConnect: Downstream port able to swap with
• • Internal Hub Feature Controller device enables:
• - USB to I
• - USB to internal hub register write and read
• • USB Link Power Management (LPM) support
• • Enhanced OEM configuration options available
• • Available in 100-pin (12mm x 12mm) VQFN
• • Commercial and industrial grade temperature
• • Standalone USB Hubs
• • Laptop Docks
• • PC Motherboards
• • PC Monitor Docks
• • Multi-function USB 3.1 Gen 1 Peripherals
• • USB 3.1 Gen 1 compliant 5 Gbps, 480 Mbps,
• - 5V tolerant USB 2.0 pins
• - 1.32V tolerant USB 3.1 Gen 1 pins
• - Integrated termination and pull-up/down resistors
• • Supports battery charging of most popular battery
• - USB-IF Battery Charging rev. 1.2 support
• - Apple
• - Chinese YD/T 1591-2006 charger emulation
• - Chinese YD/T 1591-2009 charger emulation
• - European Union universal mobile charger support
• - Support for Microchip UCS100x family of battery
• - Supports additional portable devices
• • Smart port controller operation
• - Firmware handling of companion port power
• • On-chip microcontroller
• - manages I/Os, VBUS, and other signals
• • 8 KB RAM, 64 KB ROM
• • 8 KB One-Time-Programmable (OTP) ROM
• - Includes on-chip charge pump
• • Configuration programming via OTP ROM,
• • FlexConnect
• - Reversible upstream and downstream Port 1 roles
• •PortSwap
• - Configurable USB 2.0 differential pair signal swap
• •PHYBoost
• - Programmable USB transceiver drive strength for
• •VariSense
• - Programmable USB receive sensitivity
• •Port Split
• - USB2.0 and USB3.1 Gen1 port operation can be
• • USB Power Delivery Billboard Device Support
• - Internal port can enumerate as a Power Delivery
• • Compatible with Microsoft Windows 10, 8, 7, XP,
• • Optimized for low-power operation and low ther-
• • Package
• - 100-pin VQFN (12mm x 12mm)