5X1503-1.PDF datasheet pdf

1©2019 Integrated Device Technology, IncJune 19, 2019 Description The 5X1503 is a series of small form factor programmable clock generators intended for low-power, consumer, battery powered applications, wearable and smart devices. The device is a 1 PLL + DCO architecture design with one embedded crystal. The device is OTP programmable, allowing for up to 3 unique frequency outputs. The 5X1503 has built-in unique features such as Proactive Power Saving (PPS) and a low power DCO to support system date/time keeping clock at 32.768kHz. Dynamic Frequency Control (DFC) supports dynamically changing between four different PLL frequencies via external requests with controlled frequency changes, reducing frequency overshoot and undershoot (ORT). The 5X1503S device can also support a spread clock for EMI reduction. For a description of terms and their functions, see Glossary of Features. An internal OTP memory allows the user to store up to four independent configurations that can be loaded on power-up without programming. It can then be reprogrammed again through the I 2 C interface. The 5X1503 supports three LVCMOS type outputs. Two outputs have programmable amplitude. A low-power 32.768kHz clock is supported with only less than 1.5μA current consumption for system RTC reference clock needs. Typical Applications ▪SmartDevice ▪Handheld ▪Wearable applications ▪Portable Consumer applications Features ▪Proactive Power Saving (PPS) features save power during the end device power-down mode ▪Dynamic Frequency Control (DFC) feature allows programming up to 4 difference frequencies that switch dynamically ▪Programmable output clock amplitude (1V, 1.1V, 1.2V and 1.8V) to support low swing clock requirement ▪Dedicated 32kHz output with 6 clock amplitude options (5X1503L) ▪Integrated crystal; no external input source requirement ▪Configurable through I2C or OTP programming ▪Spread spectrum clock support (5X1503S) ▪1.8V operating supply voltage ▪2 × 2 mm 10-VFQFPN package Output Features ▪3 LVCMOS outputs, 1MHz–100MHz or 32.768kHz ▪Low-power 32.768kHz clock supported Key Specifications ▪Output cycle-cycle jitter: 50ps (typ) ▪Low power-on fully active mode: 2mA (typ) ▪Low-power 32.768kHz < 1.0μA (5X1503L) 5X1503 Base Number Description VCO Range (MHz) 5X1503Standard, Integrated Crystal50 – 130 5X1503LUltra Low-power, Integrated Crystal50 – 130 5X1503SSpread Clock, Integrated Crystal500 –1100 5X1503 Datasheet MicroClock Programmable Clock Generator

Features

• 1.8V) to support low swing clock requirement